Home/Products/KANSAI/Zinc-Rich Primers/SILIFEND ZINC AS-50

SILIFEND ZINC AS-50

KANSAI · Zinc-Rich Primers

SILIFEND ZINC AS-50KANSAI · Zinc-Rich Primers Request a quote All products from this brand
BrandKANSAI
FunctionZinc-Rich Primers
Product nameSILIFEND ZINC AS-50
Product familyKANSAI
Product rangekansai

Selection & application notes

  • Zinc-rich primers require blast cleaning to Sa 2½, the specified profile, and a soluble-salt check.
  • Inorganic zinc silicates cure on controlled humidity and need sufficient curing time before overcoating.
  • Too low a DFT weakens cathodic protection; too high increases cracking risk — control against the system's total DFT.

These are general notes for the functional category; confirm parameters against the manufacturer's latest TDS.

More from this brand and function

EPOFEND ZINC 60EPOTAINER ZINC 60SD ZINC 100QD PRIMERSD ZINC 1000HA(S)SD ZINC 2000SD ZINC PRIMER 500SD ZINC PRIMER 1000HA(S)SD ZINC PRIMER 1500NSILISAFE ZINC 80SILISAFE ZINC SW-30

Equivalent products from other brands

Barrier 65 S · JOTUNBarrier 65 · JOTUNBarrier 75 CN · JOTUNBarrier 77 · JOTUNBarrier 80 E · JOTUNBarrier 80 S · JOTUNBarrier 80 UHS · JOTUNBarrier 80 WF · JOTUN

Typical application scenarios

Bridges and plant steelwork
All products in this function

Not sure which product fits? Tell us the substrate and service conditions

Share your substrate, corrosivity category and target service life — we will come back with a coating system and quantity estimate.

Contact us